Zytronic Projected Capacitive X-Y controller Touchscreen Bedienungsanleitung PDF herunterladen (Seite 19)

Draft copy

Do not use!!

SAFE OPERATING PROCEDURE

Touchscreen Driver Software Procedure

Subject

19” Touchscreen Driver Software Procedure

Name and

number of

UPGRADE

Page

19 of

Touchscreen

the touchscreen to the LCD.

____6.2

• This calibration step must be

carried out when the

touchscreen is fully mounted

into its final housing in front of

the LCD.

____6.3

• To launch a calibration click

on the Calibrate button

located in the bottom left

hand corner of the UPDD

console.

NOTE: All calibrations should be performed at the level of sight as intended use.

____6.4

• Change the number of

calibration points from 9 to

25. Single click on calibrate.

This will launch a 25 point

calibration sequence. This

will increase the timeout to 45

seconds, allowing more time

for callibration.

____6.5

• Having touched the first point

the second point will be

displayed. Sequentially touch

all 25 points as they are

displayed on the screen, as

shown in Figure 1-13.

____6.6

• Important – The accuracy of

the calibration will directly

depend on how accurately

you touch the center of each

point displayed on the screen.

____6.7

• Having touched all twenty five

(25) points, a Confirm

calibration box will appear on

the screen. If you feel the

calibration has been correctly

executed then press the

1 2 ... 14 15 16 17 18 19 20 21

Draft copy 1
Do not use!! 1

Kommentare zu diesen Handbüchern

Keine Kommentare

Zytronic Projected Capacitive X-Y controller Touchscreen Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernseher & Monitore Zytronic Projected Capacitive X-Y controller Touchscreen